Exhaust Pipe Cutter-What can I do to increase the volume?

Exhaust Pipe Cutter: Since it was first published in May 2016, this wiki has been updated 24 times. These exhaust pipe cutters are a must have for anyone who works in the automotive industry or likes to speed up in their vehicle. Cutting the tailpipe is made easier with these options, but be sure to follow the recommended safety precautions when using them. To help keep the Wiki running, we may take a cut of any sales made by our readers. It’s all about exhaust pipe cutter.

27045 from the manufacturer:

Customizing your SUV or high-performance car won’t be a problem if you have OEM 27045 (about $35).


On-road or off-road use

Straps are padded for comfort

It contains a container to store items

Ares 15009:

The Ares 15009 (about $41) uses 15 rolling blades and an adjustable chain to handle pipes ranging in diameter from 0.75 to 3.75 inches. The rubber coating on the ergonomic handle makes it easy to handle in or out of a vehicle.


Excellent for confined spaces due to its high strength steel chain.

Quickly cut in half turn

ABN instrument:

The 15 carbon steel blades on the ABN Tool’s 10-inch cutting chain (about $25) can cut pipe up to 3 inches in diameter. Hand fatigue from long projects is minimized thanks to the tool’s light weight of just 1.24 pounds. It’s all about exhaust pipe cutter.

See also  10 Apps Like Chitter: Exploring the Best Social Networking Alternatives


Provides plenty of leverage with comfortable padded straps

Cheaper than most other options.

Stanley Proto:

Stanley Proto (approximately $119) has a locking mechanism that prevents you from squeezing, which helps prevent misalignment errors. It’s a tough choice that can easily handle steel, copper, and aluminum. It’s all about exhaust pipe cutter.


A replacement chain is available for diameters of nearly 3 inches

Designed to last a long time.

Gear Wrench 2031DD:

When you have the Gear Wrench 2031DD (15 sharp blades, about $35), you’ll have more power for all the other custom jobs you’ve planned, thanks to the low spin and effort. However, double wall or stainless steel tubes cannot be used with this product.


Comfortable pliers-shaped grips

When properly lubricated, the blade works perfectly.

Black & Decker 20V max.:

To cut an exhaust pipe with a reciprocating saw, you must have previous experience with the tool. This Black and Decker 20V Max (about $50) might be a good choice if you’re experienced and willing to take the necessary safety precautions.


A blade is included; it is wireless, making it easy to maneuver; a battery must be purchased separately.

Squeezing the Sealy:

The heavy-duty Sealy Ratcheting, which retails for around $234, is an excellent choice for professionals who frequently deal with exhaust systems. Using its ratchet mechanism, you don’t need to rotate the tool around the tube to complete your cuts.


One-handed operation is possible

Expensive • Suitable for stainless steel • Expensive

32573 is hard:

When working with large diameters in tight spaces, the Rigid 32573 (approximately $31) is an excellent tool to have. The assembly is rotated around a tube using a handy detachable ratchet mechanism to power the cutting wheel. It’s all about tailpipes, Cutter.

See also  Level Up Mega Seed - How to Level Up Mega Seed?


Attenuates by a factor of 10 degrees

Stainless steel can be used.

A lifetime guarantee.

Klein 88904:

The bus tool can be quickly pulled out and retracted thanks to a lever built into the large handle. It’s all about tailpipes, Cutter.


There’s a spare wheel included, as well as a sturdy body.

It only takes a few hits.

Model number 2471-20:

Because the 12-volt battery powers it, the Milwaukee 2471-20 (about $103) makes cutting copper pipe a lot easier. While its powerful motor generates 500 RPM, it automatically adjusts itself to the correct bore once installed.



Minimum clearance required

burr-free cuts

Steel Is a Dragon Tools SDT-2A:

An extra long shank secures the Steel Dragon Tools SDT-2A (approx. $60), allowing it to be used all day without fear of damaging the tool. It’s all about tailpipes, Cutter.


Suitable for ductile iron pipe

industrial grade steel

Strong alloy cutting wheel

The Ridged 32975:

Minimalist in design, the Ridged 32975 (about $12) is just three inches long at its longest span.


In addition, it is excellent for brake lines.

The large serrated knob on the power screw

Virtually no wheel wobble

The 154 summit:

It cuts aluminum and copper with ease with its four-and-a-half-inch cutting capacity on the heavy-duty Ridged 154 (approximately $140). A beam-designed slide mechanism allows quick adjustment of cutter wheel depth.


Blade replacement without the use of a tool

Not strong enough to be used on steel, ergonomic rotary knob

Licensed Master Plumber 745122:

With a diameter of 2-1/8 inches, Master Plumber 745122 (approx. $15) is more than adequate for most residential and commercial plumbing applications. Tubes as small as 5/8 inch can be used with this.

See also  10 Job Apps Like Veryable: Your Ultimate Guide to Finding Gig Opportunities!


Designed to last a long time

Comfortable grips for quick and easy movement

Cobra PST002 product line:

With a diameter of up to one and a half inches, Cobra Products’ PST002 is suitable for PVC, vinyl and rubber. The ratchet mechanism easily cuts through the tube, leaving a perfectly smooth surface.


Easy-to-change blades

Durable epoxy coating finish

Safety lock can be easily undone

The Megabit MAG801:

Removal is built into the Megabit MAG801 ($17), so your project is ready to weld immediately after cutting with this tool. It is compatible with many materials including PVC, copper and stainless steel. It’s all about exhaust pipes, Cutter.


Turn knob which is easy to hold

Compatible with bicycle frames.

Steel quickly dulls the blade.

2031DD Gear Wrench:

For cutting pipe diameters up to three inches, the 2031DD Gear Wrench uses a ratchet and twisting action. A quarter turn is enough to cut most materials with this chain-style tool, making it ideal for hard-to-reach areas.


15 cutting steel blades

Exhausts are a good fit

Stainless steel is not suitable for use with this product.


A pipe cutter has several advantages over a saw when cutting a pipe to length. Even a moderately competent do-it-yourselfer can feel comfortable working on various projects with our selection of PVC, copper and steel pipe cutters. In addition to the lighter models, we’ve also included some heavy-duty options for professional use. It’s all about exhaust pipe cutter.

Common questions:

Can a catalytic converter be easily disconnected in a number of ways?

However, once you sit at home, you can continue hammering.

Where can I get rid of my muffler without damaging it?

Exhaust pipes should be cut at least four to six inches from the ends of the muffler. Allows welding of a new muffler or an existing muffler to a different vehicle. Slowly cut the tailpipe cutter with a constant push and pull motion.

What can I do to increase the volume of the stock exhaust?

Replace your vehicle’s stock muffler with a replacement muffler designed to increase the sound. A stock muffler will produce significantly less sound than a glass pack, direct exhaust or straight pipe design.

Also read: What does the color green mean?